Container Door Hinge Pin, Stainless Steel 304, 108 mm

The Door Hinge Pin, code LGPINSUS304, is the pivot in the container door hinge set, made of SUS304 stainless steel, 108 mm long.

Used to replace original pins that are worn, bent or damaged in Container M&R work. Suited to depots, container repair workshops and repair contractors.

What does the Door Hinge Pin do in the door hinge set?

The pin works with the hinge blade, hinge lug and bush, as the door set is designed, so the door swings open and closed properly.

Choosing a pin that fits the hinge set matters for play and door alignment. A pin that is too loose lets the door drop and makes it hard to close, while a pin that is too tight makes the hinge bind.

When the door drops or the hinge has play, check the pin, bush and hinge hole together, because replacing only the pin may not fix the problem if the parts holding the pin are worn or deformed.

How is a 304 stainless steel container door hinge pin different from a standard one?

This pin is made from SUS304 stainless steel, a grade commonly used where parts face moisture and salt spray.

The hinge set is on the outside of the container and exposed to the weather at all times, so corrosion here directly affects service life.

Choose the material together with the container owner's requirements and the original parts in use.

Technical data and GAVAN product code

• GAVAN product code: LGPINSUS304
• Product name: 304 stainless steel hinge pin
• Material: SUS304 stainless steel
• Length: 108 mm
• Diameter: check against the product spec before ordering
• Application: container door hinge sets of compatible size
• Warehouses: Bangplee and Laem Chabang, stock ready to ship

Key points for M&R work

Compare sizes before replacing Check the diameter, length and pin end type against the original. The same length does not confirm it is interchangeable.

Check wear together Check the pin surface, bush and hinge hole, especially for grooved wear, deformed holes and abnormal play.

Check after fitting Check the pin is retained as originally designed, open and close the door, make sure the hinge turns without binding, and restore the corrosion protection followingthe container owner's requirements

When should a container door hinge pin be replaced?

• The pin is worn with grooves or a rough surface
• The pin is bent from impact
• The hinge is loose or has excessive play
• The door drops, is hard to close or the lock gear is out of line
• Corrosion is found on the pin during container inspection

Door drop usually comes from several parts at once. Checking the whole hinge set before ordering parts reduces the chance of reopening the job.

Parts often replaced at the same time

Door set repairs often affect surrounding parts. Check them together to avoid reopening the job.

• Container Door Rail Check when the door leaf is out of shape
• Door Gasket, container door seal Check the contact line after realigning the door
• Container Front Corner Post For corner structure repairs
• Corner Casting, container corner fitting Check together when the structure is damaged

Frequently asked questions

Does a 108 mm pin fit every hinge set? Not always. The diameter and pin end type must also be checked. Send a photo of the original hinge set for our team to check.

Does replacing only the pin fix door drop? Not always. If the bush or hinge hole is already worn or deformed, replace the whole set, otherwise the play will soon return.

Are pins in other materials or lengths available? Please tell us the size you need and the original material so we can check stock.

Order the Door Hinge Pin from Gavan Asia

Gavan Asia supplies SUS304 stainless steel hinge pins, 108 mm long, code LGPINSUS304, to depots, M&R contractors and container repair companies. See all products atContainer spare parts category

Please send the product code, quantity and diameter of the original pin with a photo of the hinge set so we can check the model before you order.

Contact Gavan Asia for prices, product details and stock ready to ship.