Ratchet Lashing Strap with Double J Hook

The Ratchet Tie Down Strap with J Hooks is a standard cargo securing device for road transport, made up of a 100% polyester strap, a ratchet tensioner and Double J hooks at both ends. It references EN 12195-2 and has been tested and awarded the GS mark (Geprüfte Sicherheit) by TÜV, a German safety certification, with an S/N field on the label so each strap can be traced.

This model has a Breaking Strength of 5,000 kg, is 8 metres long, and has a Lashing Capacity of 2,500 daN straight pull and 5,000 daN loop, following EN 12195-2, which sets lashing capacity at half the breaking strength. This is not the cargo weight one strap can hold. The number of straps actually needed is calculated to EN 12195-1, based on cargo weight, friction, strap angle and braking forces.

Available in 2 versions: With Wear Sleeve and Without Wear Sleeve. The wear sleeve fits over the strap to protect it from abrasion where it passes over corners or steel edges. We recommend the wear sleeve version for securing machinery, structural steel and loads with sharp edges, because abrasion on sharp edges is the main reason straps fail before the end of their service life.

Open Monday to Saturday, 08:00 to 17:00

Description

Technical data:

  • Reference standard: EN 12195-2
  • Certification: GS mark, tested by TÜV
  • Strap material: 100% polyester (PES), blue label per the standard's material code
  • Breaking strength (Breaking Strength): 5,000 kg
  • Lashing capacity (LC), straight pull: 2,500 daN
  • Lashing capacity (LC), loop: 5,000 daN
  • Length: 8 metres
  • Standard Hand Force (SHF): 50 daN as set by the standard
  • Elongation at lashing capacity: not more than 7%
  • Hooks: Double J (Double J Hook), anti rust plated
  • Ratchet handle: plastic covered
  • Product options: with wear sleeve or without wear sleeve
  • Chemical resistance: resistant to weak acids, not resistant to alkalis
  • Traceability: S/N shown on the product label
  • Limitation: not for lifting, for cargo securing only

Key features:

  • GS mark certified, tested by TÜV, referencing EN 12195-2, with an S/N field for full traceability
  • Breaking strength 5,000 kg, lashing capacity 2,500 daN straight pull and 5,000 daN loop
  • 100% polyester, low stretch, does not absorb water, resists sun and rain, suited to outdoor use
  • Double J hooks (Double J Hook) fit a wide range of anchor points
  • Plastic covered ratchet handle, comfortable grip and full leverage when ratcheting
  • Available with or without a wear sleeve to suit the edges of the load

Applications:

Securing cargo on trucks and trailers, securing cargo inside containers, securing machinery and construction equipment, securing cars on transport vehicles

How to use: hook onto the vehicle anchor points on both sides, feed the strap end through the ratchet spindle, and ratchet the handle until the strap is as tight as needed. The ratchet locks in place automatically. To release, pull the release catch and open the handle fully.

Limitation: for cargo securing only. Do not use for lifting (Not for lifting), as stated on the label. For lifting equipment, please see our EN 1492-1 web slings.

Standards

EN 12195-2 (เครื่องหมาย GS ทดสอบโดย TÜV)

Material

โพลีเอสเตอร์ 100% (PES)

Length

8 metres

Lashing capacity (LC)

2,500 daN

Breaking strength

5,000 kg

Hooks

Double J Hook

Options

มีปลอกกันบาด และ ไม่มีปลอกกันบาด